WAR-06(2C)
WAR-06(3C)
*Model description:
WAR-06 type is equipped with internal and external flushing structure, and can be used
without internal flushing or external flushing as the case may be
The inner hole of the war-06-2 type axle sleeve is the through hole
The inner hole of the war-06-3 type shaft sleeve is a step hole, and the connecting flange
is provided with a static ring to protect the boss
*Structural features:
Single end face consolidated mechanical seal
balanced
Stationary ring compensation
The spring is isolated from the medium
The connecting flange shall be installed in the pump chamber
*Parameter range:
Pressure: 0 ~ 0.8mpa
The temperature: – 20 ~ 120 ℃
Linear speed: 10 m/s or less
Solid content: 18%
The allowable axial channeling momentum is: 0.3mm
Axle diameter: 30 ~ 220mm
*Lubrication and cooling
Lubricated and cooled by medium or external quench fluid
The flushing fluid pressure should be < 0.05mpa to maintain the flow
The internal flushing water pressure should be higher than the medium pressure within
the sealed cavity of 0.1 ~ 0.3mpa
*Operating conditions:
It can completely replace the mechanical seal imported from KSB pump and WARMAN
pump used in the flue gas desulfurization device of power plant, and also used in the slurry
circulation pump produced by xiangyang wuerwu pump co., LTD., shijiazhuang industrial
pump factory co., LTD., shijiazhuang qiangqiang pump group and other domestic manufacturers.
